Hello, welcome to Yangzhou Qianglin Hydraulic Machinery Co., Ltd.

24-Hour Hour Hotline:

0514-86602366

0514-86602366

© 2019 Yangzhou Qianglin Hydraulic Machinery Co., Ltd. 苏ICP备18017419号-2 Powered by www.300.cn

HOME         ABOUT         PRODUCT         NEWS         RECRUIT         APPLICATIONS         CONTACT

Fax:0514-86605199       E-mail:yzqljx@163.com       Add:Yangzhou Jiangdu Wujian Industrial Park

Unified Consulting Hotline

NEWS CENTER

Qianglin hydraulics

Self-locking of Metallurgical Hydraulic Oil Cylinders and the Hazard of Gaoyou

Classification:
Industry news
Release time:
2019/10/31
Page view
[Abstract]:
Self-lockingofMetallurgicalHydraulicOilCylindersandtheHazardofGaoyou1.Thetemperatureofthemetallurgicalhydrauliccylinderistoohigh,andevenhot.Intheviewofthemetallurgicalhydrauliccylindermanufacturingpla

Self-locking of Metallurgical Hydraulic Oil Cylinders and the Hazard of Gaoyou

1. The temperature of the metallurgical hydraulic cylinder is too high, and even hot. In the view of the metallurgical hydraulic cylinder manufacturing plant, if the disposal is not good, the effect will be very severe. In detail, it is for the sealing ring to take effect and cause the hydraulic oil to bubble, resulting in oil leakage. If it is severe, it will also make the metallurgical hydraulic cylinder unable to operate and work properly.
Metallurgical hydraulic cylinder
2. The self-locking method on the metallurgical hydraulic cylinder, according to the metallurgical hydraulic cylinder manufacturing plant, it is important to lock the oil road and lock the machine. In this oil road self-lock, is installed in the metallurgical hydraulic cylinder valve to achieve self-lock. However, safety and reliability are not exceptionally good, because if there is a leak, self-locking will still take effect.
The machine in the metallurgical hydraulic cylinder locks itself, and a nut is installed on the cylinder plunger to achieve self-locking through the tightening of the process nut. If you need to remove pressure, then spin the nut up to allow the plunger to return to position. Therefore, this kind of metallurgical hydraulic cylinder, we call it self-locking metallurgical hydraulic cylinder.