Hello, welcome to Yangzhou Qianglin Hydraulic Machinery Co., Ltd.

24-Hour Hour Hotline:

0514-86602366

0514-86602366

© 2019 Yangzhou Qianglin Hydraulic Machinery Co., Ltd. 苏ICP备18017419号-2 Powered by www.300.cn

HOME         ABOUT         PRODUCT         NEWS         RECRUIT         APPLICATIONS         CONTACT

Fax:0514-86605199       E-mail:yzqljx@163.com       Add:Yangzhou Jiangdu Wujian Industrial Park

Unified Consulting Hotline

NEWS CENTER

Qianglin hydraulics

Electric Hydraulic Push Rod

Classification:
Industry news
Release time:
2020/01/02
Page view
[Abstract]:
ElectricHydraulicPushRod1,canstartwithload,andelectricpushrodisverydifficult.2,withoverloadmaintenancecapacity,willnotdamagethemotorandparts.3,thesameelectro-hydraulicpushroditspush,pullcanbewirelesss

Electric Hydraulic Push Rod 1, can start with load, and electric push rod is very difficult. 2, with overload maintenance capacity, will not damage the motor and parts. 3, the same electro-hydraulic push rod its push, pull can be wireless speed, so the drive range is wide, this is electric push rod and gas can not be compared. 4. With the same thrust and speed, it uses only half as much power as an electric putter. 5, this product uses full hydraulic transmission, moving, smooth operation, can effectively buffer the impact of the outside, stroke accurate cylinder and Electric Push Rod is not done. 6, electro-hydraulic push rod selection machine, electrical, hydraulic integration of all closed structure, operating oil circulation in the non-pressure closed steel cylinder, small size, no oil leakage, easy installation, maintenance. In the harsh working environment, no dust, no water, internal corrosion, service life than the Cylinder Electric Push Rod lasting. 7, the investment is small, the cylinder needs to build air pressure station, hydraulic cylinder needs hydraulic station, and electro-hydraulic push rod does not need any ancillary equipment. 8. Easy maintenance. Under special circumstances, the electro-hydraulic push rod only needs to be replaced, while the hydraulic cylinder needs to find out the cause of the failure slowly before carrying out careful maintenance, which will affect the normal operation of all operations. The electro-hydraulic Push Rod, namely the electro-hydraulic Push Rod, is suitable for the reciprocating push-pull straight line (or the reciprocating rotation must point of view) movement, may use in the rise, the drop or the clamp work object place, may also use in the distance and the high altitude dangerous area, and can be connected to the Computer Network for Assembly (program) control. It has been widely used in metallurgy, mining, coal, power, machinery, grain, cement, chemical, water conservancy, transportation and other parts, is an indispensable universal power source. WORKING PRINCIPLE: electro-hydraulic push rod to motor as the power source, through the motor forward (backward) rotation, so that hydraulic oil through the two-way gear pump output pressure oil, through the oil circuit block, sent to the operating cylinder, Piston Rod Reciprocating Movement. PROS: 1. It has overload automatic maintenance function: When the electro-hydraulic push rod is working, if the external force of the Piston Rod exceeds the additional output force or the Piston has reached the end point, the motor is still rolling, then the oil pressure in the oil circuit increases to the adjusted pressure, overflow Valve quickly and accurately overflow to complete overload automatic maintenance. The motor's running, but it's not GONNA burn out. 2. SELF-LOCKING FUNCTION: The pressure self-locking Organization is planned in the Oil Circuit Integrated Block of the electro-hydraulic Push Rod, the motor stops rolling, the piston rod immediately stays in a certain position, and the pressure oil is in the state of keeping pressure. 3. Stepless conditioning: According to user requirements, in the extra speed, output force and travel range for stepless conditioning. The model states that the electro-hydraulic push rod is mainly composed of six basic elements, such as the type of the push rod, the protection level of the motor, the extra output force, the stroke, the extra speed and the use point of view, etc. , matching three conditioning functions, namely: speed conditioning reasoning, tension conditioning, stroke conditioning (stroke switch positioning) . In addition to the above three conditioning functions must be specified when ordering, other please refer to the model preparation method, carefully fill in the six elements.