24-Hour Hour Hotline:
Which method can hydraulic cylinder choose to carry on the device?
In fact, on different working occasions, different hydraulic cylinder products, in the device, we need to choose different device methods, so as to as far as possible to meet its application requirements. Obviously, the hydraulic cylinder includes many different devices, but the first can be divided into two categories, namely: Axis fixed class and axis swing class two. So what are the differences between these two different methods of installation? First of all, let's introduce the characteristics of the first method of installation. When the hydraulic cylinder is installed in this way, then in its work, its axis direction is always the same situation. Generally speaking, most of the machine tools used on the oil cylinder is the use of this device method. This device method can be divided into three types of red, respectively: Universal Tie rod type, Flange type and support type. The first is generally used for short-stroke, low-pressure hydraulic cylinder. The first structural feature of the utility model is that through holes are drilled on the two ends of the cylinder head, and the cylinder and the device seat are connected and tensioned by a double-head screw And the third is the cylinder head and tail ends of the Flange and support fastening together. Next, let's look at the characteristics of the second method of installation. We know, in the hydraulic cylinder for reciprocating motion, because its internal interaction, so that the axis of the swing, in order to adjust the direction and direction. On this type of cylinder, generally can only choose to use period can swing the method of stranding. In view of the current situation, many construction machinery, agricultural machinery and dump trucks used by the hydraulic cylinder more choose this kind of device. This type of device method can also be subdivided into two categories: TRUNNION and earring. In the former, the Capstan which is fixed on the hydraulic cylinder is installed in the axle seat of the machine, so that the axle line can swing in a certain plane, while in the latter, the earrings of the hydraulic cylinder are connected with the earrings of the machine by the pin, to swing freely in a plane.